Electrical System Ventilation & Filter Fans
When it comes to electrical system performance, the value of smart airflow cannot be underestimated. That’s because simple airflow within critical electrical and industrial systems prevents a host of problems, from heat buildup to dust infiltration to moisture accumulation and beyond. These problems ultimately manifest themselves as downtime that reduces operational efficiency and ultimately profitability.
Thankfully, Cosmotec offers a variety of ventilation and filter fan options that are an easy addition to just about any electrical or power system. A wall-mounted or roof-mounted fan draws in cold ambient air or exhausts warm air from the electrical panel. They provide simple and economical heat dissipation and offer a compact and efficient solution.
Cosmotec fans can be the perfect solution when:
- the outside air has a lower temperature value than the inside air (approx. ΔT=10°C)
- a low cooling capacity is required
- little maintenance is required
- the ambient air is not excessively oily or dusty
- outside air and humidity can enter the cabinet
Browse our innovative ventilation and fan systems shown below, and contact us today to learn more and request pricing. We look forward to supporting your next project!
Roof Mounted Fans for Electrical Panels
Key Specs
- Sizes 19, 22, 25, 35
- Air flow rate from 500 m³/h to 1870 m³/h
- Power supply 230Vac and 115Vac.
- Temperature range
TSF = -40 … +60 °C
TSV = -25 … +55 °C - Protection Degree IP43 or IP54 / Type1 or Type12
Details
KryosRoof roof mounted fans are the ideal industrial ventilation solution for extracting warm air from the roof. Their compact dimensions allow them to be installed on various types of electrical panels, while the layout and fans ensure high flow rates and operating efficiency.
The TSF/TSV feature a new design, compact dimensions and the flexibility properties typical of Cosmotec products.
The radial fans on KryosROOF provide high flow rates and heads to ensure the correct airflow within the cabinet. In addition, there is a high efficiency version with EC fans and an active control probe, supplied as standard, which adjusts the fan speed to reduce electricity consumption and ensure optimum air flow according to the temperatures in the electrical panel. Electrical consumption can already be reduced by 20/30% at maximum operating conditions.
Filter Fans for Electrical Cabinets
Key Specs
- Sizes 10, 15, 20, 25, 30
- Air flow rate from 35 m³/h to 850 m³/h
- Power supply available in 230Vac and 115Vac, 24Vdc, 400/460Vac. On request 12Vdc and 48Vdc
- Colouring standard RAL7035. RAL9005 on request
- Protection Degree IP54 / Type12
- Protection Degree IP55 with additional filter mat
- Protection Degree IP56 with hose-proof hood
Details
Kryos³ GS filters fans, for the ventilation of electrical enclosures, are the optimal solution when the ambient temperature is lower than the temperature inside the cabinet, and can be installed, thanks to their reduced depth, on various types of panels.
Together with a new modern design, Kryos³ filter fans offer the same wide range of sizes and power supplies as previous generations, allowing you to choose the most suitable solution for your installation and geographical area.
Easy to install without the use of tools or screws, thanks to the clips on the rear grille, which provide an adequate seal between the grille and the cabinet. The filter fans can be installed on different types of enclosures with thicknesses between 0.8 and 3 mm, for CNx10 between 0.8 and 2 mm. Fixing with screws is possible for larger thicknesses; each article is provided with embossments on the rear grille.
